资源类型

期刊论文 576

会议视频 22

年份

2023 48

2022 42

2021 61

2020 30

2019 40

2018 25

2017 23

2016 29

2015 13

2014 34

2013 32

2012 19

2011 20

2010 31

2009 31

2008 24

2007 24

2006 7

2005 15

2004 6

展开 ︾

关键词

钢结构 10

钢箱梁 4

TRIP钢 3

三塔悬索桥 3

三峡工程 3

Cu(In 2

人工智能 2

人工流产 2

仿真优化 2

低成本 2

创新 2

发展 2

悬索桥 2

整体沉放 2

新技术 2

析出强化 2

泰州大桥 2

疲劳 2

碳中和 2

展开 ︾

检索范围：

排序： 展示方式：

Parametric study of hexagonal castellated beams in post-tensioned self-centering steel connections

Hassan ABEDI SARVESTANI

《结构与土木工程前沿（英文）》 2019年 第13卷 第5期   页码 1020-1035 doi: 10.1007/s11709-019-0534-6

摘要： The effects of important parameters (beam reinforcing plates, initial post-tensioning, and material properties of steel angles) on the behavior of hexagonal castellated beams in post-tensioned self-centering (PTSC) connections undergone cyclic loading up to 4% lateral drift have been investigated by finite element (FE) analysis using ABAQUS. The PTSC connection is comprised of bolted top and bottom angles as energy dissipaters and steel strands to provide self-centering capacity. The FE analysis has also been validated against the experimental test. The new formulations derived from analytical method has been proposed to predict bending moment of PTSC connections. The web-post buckling in hexagonal castellated beams has been identified as the dominant failure mode when excessive initial post-tensioning force is applied to reach greater bending moment resistance, so it is required to limit the highest initial post-tensioning force to prevent this failure. Furthermore, properties of steel material has been simulated using bilinear elastoplastic modeling with 1.5% strain-hardening which has perfectly matched with the real material of steel angles. It is recommended to avoid using steel angles with high yielding strength since they lead to the yielding of bolt shank. The necessity of reinforcing plates to prevent beam flange from local buckling has been reaffirmed.

关键词： finite element analysis     hexagonal castellated beam     parametric study     post-tensioned self-centering steel connection     steel moment-resisting frame    

HTML PDF 收藏

Seismic tests of post-tensioned self-centering building frames with column and slab restraints

Chung-Che CHOU, Jun-Hen CHEN

《结构与土木工程前沿（英文）》 2011年 第5卷 第3期   页码 323-334 doi: 10.1007/s11709-011-0119-5

摘要： Post-tensioned (PT) self-centering moment frames have been developed as an alternative to typical moment-resisting frames (MRFs) for earthquake resistance. When a PT frame deforms laterally, gaps between the beams and columns open. However, the gaps are constrained by the columns and the slab in a real PT self-centering building frame. This paper presents a methodology for evaluating the column restraint and beam compression force based on the column deformation and gap openings at all stories. The method is verified by cyclic tests of a full-scale, two-bay by one-story PT frame. Moreover, a sliding slab is proposed to minimize restraints on the expansion of the PT frame. Shaking table tests were conducted on a reduced-scale, two-by-two bay one-story specimen, which comprises one PT frame and two gravitational frames. The PT frame and gravitational frames are self-centering throughout the tests, responding in phase with only minor differences in peak drifts caused by expansion of the PT frame. When the specimen is excited by a simulation of the 1999 Chi-Chi earthquake with a peak ground acceleration of 1.87 g, the maximum interstory drift and the residual drift are 7.2% and 0.01%, respectively.

关键词： post-tensioned frame     frame expansion     column restraint     sliding slab     frame test     shake table test    

HTML PDF 收藏

Self-centering steel plate shear walls for improving seismic resilience

Patricia M. CLAYTON,Daniel M. DOWDEN,Chao-Hsien LI,Jeffrey W. BERMAN,Michel BRUNEAU,Laura N. LOWES,Keh-Chuan TSAI

《结构与土木工程前沿（英文）》 2016年 第10卷 第3期   页码 283-290 doi: 10.1007/s11709-016-0344-z

摘要： As part of a Network for Earthquake Engineering Simulation research project led by researchers at the University of Washington with collaborators at University at Buffalo, and Taiwan National Center for Research on Earthquake Engineering, a self-centering steel plate shear wall (SC-SPSW) system has been developed to achieve enhanced seismic performance objectives, including recentering. The SC-SPSW consists of thin steel infill panels, referred to as web plates that serve as the primary lateral load-resisting and energy dissipating element of the system. Post-tensioned (PT) beam-to-column connections provide system recentering capabilities. A performance-based design procedure has been developed for the SC-SPSW, and a series of nonlinear response history analyses have been conducted to verify intended seismic performance at multiple hazard levels. Quasi-static subassembly tests, quasi-static and shake table tests of scaled three-story specimens, and pseudo-dynamic tests of two full-scale two-story SC-SPSWs have been conducted. As a culmination of this multi-year, multi-institutional project, this paper will present an overview of the SC-SPSW numerical and experimental research programs. This paper will also discuss innovative PT connection and web plate designs that were investigated to improve constructability, resilience, and seismic performance and that can be applied to other self-centering and steel plate shear wall systems.

关键词： self-centering     steel plate shear walls     large-scale experiment     post-tensioned connections     performance-based design    

HTML PDF 收藏

Probabilistic safety assessment of self-centering steel braced frame

Navid RAHGOZAR, Nima RAHGOZAR, Abdolreza S. MOGHADAM

《结构与土木工程前沿（英文）》 2018年 第12卷 第1期   页码 163-182 doi: 10.1007/s11709-017-0384-z

摘要： The main drawback of conventional braced frames is implicitly accepting structural damage under the design earthquake load, which leads to considerable economic losses. Controlled rocking self-centering system as a modern low-damage system is capable of minimizing the drawbacks of conventional braced frames. This paper quantifies main limit states and investigates the seismic performance of self-centering braced frame using a Probabilistic Safety Assessment procedure. Margin of safety, confidence level, and mean annual frequency of the self-centering archetypes for their main limit states, including PT yield, fuse fracture, and global collapse, are established and are compared with their acceptance criteria. Considering incorporating aleatory and epistemic uncertainties, the efficiency of the system is examined. Results of the investigation indicate that the design of low- and mid-rise self-centering archetypes could provide the adequate margin of safety against exceeding the undesirable limit-states.

关键词： self-centering steel braced frame     mean annual frequency     safety assessment     confidence level     margin of safety    

HTML PDF 收藏

Validation of a steel dual-core self-centering brace (DC-SCB) for seismic resistance: from brace member

Chung-Che CHOU,Ping-Ting CHUNG,Tsung-Han WU,Alexis Rafael Ovalle BEATO

《结构与土木工程前沿（英文）》 2016年 第10卷 第3期   页码 303-311 doi: 10.1007/s11709-016-0347-9

摘要： A steel dual-core self-centering brace (DC-SCB) is an innovative structural member that provides both energy dissipation and self-centering properties to structures, reducing maximum and residual drifts of structures in earthquakes. The axial deformation capacity of the DC-SCB is doubled by a parallel arrangement of two inner cores, one outer box and two sets of tensioning elements. This paper presents cyclic test results of a DC-SCB component and a full-scale one-story, one-bay steel frame with a DC-SCB. The DC-SCB that was near 8 m-long was tested to evaluate its cyclic behavior and durability. The DC-SCB performed well under a total of three increasing cyclic loading tests and 60 low-cycle fatigue loading tests without failure. The maximum axial load of the DC-SCB was near 1700 kN at an interstory drift of 2.5%. Moreover, a three-story dual-core self-centering braced frame (DC-SCBF) with a single-diagonal DC-SCB was designed and its first-story, one-bay DC-SCBF subassembly specimen was tested in multiple earthquake-type loadings. The one-story, one-bay subassembly frame specimen performed well up to an interstory drift of 2% with yielding at the column base and local buckling in the steel beam; no damage of the DC-SCB was found after all tests. The maximum residual drift of the DC-SCBF caused by beam local buckling was 0.5% in 2.0% drift cycles.

关键词： dual-core self-centering brace (DC-SCB)     braced frame tests     residual deformation    

HTML PDF 收藏

Secondary transfer length and residual prestress of fractured strand in post-tensioned concrete beams

Lizhao DAI; Wengang XU; Lei WANG; Shanchang YI; Wen CHEN

《结构与土木工程前沿（英文）》 2022年 第16卷 第3期   页码 388-400 doi: 10.1007/s11709-022-0809-1

摘要： An experimental study is performed on five post-tensioned concrete beams to explore the effects of different fracture positions on secondary transfer length and residual prestress of fractured strand. A numerical model is developed and used to predict the secondary transfer length and residual prestress of fractured strand in post-tensioned concrete beams. The model change interaction, which can deactivate and reactivate the elements for simulating the removal and reproduction of parts of the model, is used to reproduce the secondary anchorage of fractured strand. The numerical model is verified by experimental results. Results shows that the fractured strand can be re-anchored in concrete through the secondary anchorage, and the secondary transfer length of fractured strand with the diameter of 15.2 mm is 1133 mm. The residual prestress of fractured strand increases gradually in the secondary transfer length, and tends to be a constant beyond it. When the fractured strand is fully anchored in concrete, a minor prestress loss will appear, and the average prestress loss is 2.28% in the present study.

关键词： post-tensioned concrete beams     strand fracture     secondary transfer length     residual prestress    

HTML PDF 收藏

Experimental study of the restoring force mechanism in the self-centering beam (SCB)

Abhilasha MAURYA,Matthew R. EATHERTON

《结构与土木工程前沿（英文）》 2016年 第10卷 第3期   页码 272-282 doi: 10.1007/s11709-016-0346-x

摘要： In the past, several self-centering (SC) seismic systems have been developed. However, examples of self-centering systems used in practice are limited due to unusual field construction practices, high initial cost premiums and deformation incompatibility with the gravity framing. A self centering beam moment frame (SCB-MF) has been developed that mitigates several of these issues while adding to the advantages of a typical SC system. The self-centering beam (SCB) is a shop-fabricated, self-contained structural component that when implemented in a moment resisting frame can bring a building back to plumb after an earthquake. This paper describes the SCB concepts and experimental program on five SCB specimens at two-third scale relative to a prototype building. Experimental results are presented including the global force-deformation behavior. The SCBs are shown to undergo 5%–6% story drift without any observable damage to the SCB body and columns. Strength equations developed for the SCB predict the moment capacity well, with a mean difference of 6% between experimental and predicted capacities. The behavior of the restoring force mechanism is described. The limit states that cause a loss in system's restoring force which lead to a decrease in the self-centering capacity of the SCB-MF, are presented.

关键词： self-centering seismic system     seismic design     hysteretic behavior     restoring force     resilient structural system    

HTML PDF 收藏

Parametric study on seismic performance of self-centering reinforced concrete column with bottom-placed

《结构与土木工程前沿（英文）》   页码 1145-1162 doi: 10.1007/s11709-023-0945-2

摘要： To realize seismic-resilient reinforced concrete (RC) moment-resisting frame structures, a novel self-centering RC column with a rubber layer placed at the bottom (SRRC column) is proposed herein. For the column, the longitudinal reinforcement dissipates seismic energy, the rubber layer allows the rocking of the column, and the unbonded prestressed tendon enables self-centering capacity. A refined finite element model of the SRRC column is developed, the effectiveness of which is validated based on experimental results. Results show that the SRRC column exhibits stable energy dissipation capacity and no strength degradation; additionally, it can significantly reduce permanent residual deformation and mitigate damage to concrete. Extensive parametric studies pertaining to SRRC columns have been conducted to investigate the critical factors affecting their seismic performance.

关键词： seismic resilience     self-centering     rubber layer     flag-shaped hysteresis loop     parametric study    

HTML PDF 收藏

Computational studies on the seismic response of the State Route 99 bridge in Seattle with SMA/ECC plastic hinges

Jiping GE, M. Saiid SAIIDI, Sebastian VARELA

《结构与土木工程前沿（英文）》 2019年 第13卷 第1期   页码 149-164 doi: 10.1007/s11709-018-0482-6

摘要： This paper reports a computational study on the seismic response of a three-span highway bridge system incorporating conventional and novel substructure details for improved seismic performance. The bridge has three continuous spans supported by two single-column piers and integral abutments founded on drilled shafts. It will be the first full-scale highway bridge to use superelastic shape memory alloy bars (SMA) and engineered cementitious composite (ECC) to mitigate column plastic hinge damage and minimize residual displacements after a strong earthquake. A three-dimensional computational model capturing the nonlinear constitutive response of the novel materials and the effects of dynamic soil-structure interaction was developed to assess the seismic response of the bridge in finite-element software OpenSees. Two versions of the same bridge were analyzed and compared, one with conventional cast-in-place reinforced concrete columns, and the other with top plastic hinges incorporating Nickel-Titanium (NiTi) SMA reinforcing bars and ECC. The novel SMA/ECC plastic hinges were found to substantially reduce damage and post-earthquake residual displacements in the bridge substructure, but led to larger maximum drifts relative to the bridge with conventional reinforced concrete plastic hinges. The analysis results suggested that the novel plastic hinges could lead to improved post-earthquake serviceability of bridges after intense earthquakes.

关键词： seismic design     analytical simulation     near-fault earthquakes     shape memory alloy     engineered cementitious composite     self-centering    

HTML PDF 收藏

Static behavior of planar intersecting CFST connection in diagrid structure

Ling LI, Xianzhong ZHAO, Ke KE

《结构与土木工程前沿（英文）》 2011年 第5卷 第3期   页码 355-365 doi: 10.1007/s11709-011-0125-7

摘要： Intersecting connection plays an important role in the new diagrid structural system for high-rise buildings. To investigate the static behavior of the intersecting connection of concrete-filled steel tubular (CFST) columns, a typical reduced-scale planner connection specimen is tested under monotonic axial compression. The failure modes, force mechanism and bearing capacity of intersecting CFST connections are analyzed further in the follow-up numerical simulation, considering influences of intersecting angle, elliptical plate and ring plate. Test and simulation results prove that, intersecting connection can develop fully plastic deformation and provide sufficient bearing capacity. Parametric analysis indicates that bearing capacity of planar intersecting CFST connection mainly depends on intersecting angle and thickness of elliptical plate, while the ring plate affects that little. Capacity estimation method for planar intersecting CFST connection is proposed basing on the capacity of the critical section which is located near intersecting center for a distance of steel tube radius, and the design suggestions is provided in the end of this paper.

关键词： diagrid structure     concrete-filled steel tube     planar intersecting connection     experimental research     mechanism analysis    

HTML PDF 收藏

Experimental study on pile-end post-grouting piles for super-large bridge pile foundations

Weiming GONG, Guoliang DAI, Haowen ZHANG

《结构与土木工程前沿（英文）》 2009年 第3卷 第2期   页码 228-233 doi: 10.1007/s11709-009-0019-0

摘要： The application of pile-end post-grouting piles for super-large bridge pile foundations in some important projects was introduced in this paper. There are totally 21 test piles. The maximum pile diameter varies from 2.5 m to 3 m, and the maximum length is 125 m; the bearing capacity of the post-grouting piles is over ten thousands tons. Based on the test results, the bearing capacity, displacement, and bearing characteristic before and after grouting were analyzed. The results show that the bearing capacity of the piles are increased in different degrees after grouting although the technical parameters, including the patterns of grouting pipes, pressure, dosages of cement, duration of grouting lasting time, are different. However, the obtained values are very discrete. In addition, the calculation formula for the post-grouting piles under specified grouting condition was deduced based on the statistics analysis results of 57 test piles. The research results have been applied in the design of bridge foundation.

关键词： self-balanced testing technique     pile-end post-grouting     bearing capacity     grouting technology    

HTML PDF 收藏

Stress-strain relationship of recycled self-compacting concrete filled steel tubular column subjected

Feng YU, Cheng QIN, Shilong WANG, Junjie JIANG, Yuan FANG

《结构与土木工程前沿（英文）》 2020年 第14卷 第3期   页码 760-772 doi: 10.1007/s11709-020-0618-3

摘要： As a typical compression member, the concrete-filled steel tube has been widely used in civil engineering structures. However, little research on recycled self-compacting concrete filled circular steel tubular (RSCCFCST) columns subjected to eccentric load was reported. In this study, 21 specimens were designed and experimental studies on the stress-strain relationship of were carried out to study the mechanical behaviors. Recycled coarse aggregate replacement ratio, concrete strength grade, length to diameter ratio and eccentric distance of specimens were considered as the main experimental parameters to carry out eccentric compression tests. The corresponding stress-strain relationship curves were used to analyze the influence of concerned parameters on eccentric load-bearing capacity of RSCCFCST columns. The experimental results show that the strain of the eccentric compression stress-strain curves increase with the increase of recycled coarse aggregate replacement ratio and concrete strength grade. With increase of eccentric distance, the ductility of specimens increases while the bearing capacity decreases. Moreover, a phenomenological model of RSCCFCST columns is proposed, which exhibits versatile ability to capture the process during loading. The present study is expected to further understanding the behaviors and to provide guidance of RSCCFCST columns in design and engineering applications.

关键词： concrete filled circular steel tubular columns     recycled self-compacting concrete     eccentric compression     recycled coarse aggregate replacement ratio     stress-strain relationship    

HTML PDF 收藏

Experimental research on self-stressing and self-compacting concrete filled steel tube columns subjected

Chengkui HUANG, Zuoqing SHANG, Peng ZHANG,

《结构与土木工程前沿（英文）》 2009年 第3卷 第4期   页码 455-461 doi: 10.1007/s11709-009-0058-6

摘要： A total of fifteen self-stressing and self-compacting concrete (SSC) filled steel tube columns and three common self-compacting concrete filled steel tube (CFST) columns are tested under eccentric compression load to analyze the effect of initial self-stress on the compression behavior of CFSTs. The results show that the elastic working range of the columns is lengthened because of initial self-stress and it slightly decreases with the increase of load eccentricity ratio and slenderness ratio. Because of the initial self-stress, the concrete core is always under compression in three directions, so the compactness is enhanced and the ultimate bearing capacity obviously increases; but the initial self-stress hardly affects the failure mode of the columns.

关键词： increase     capacity     failure     CFSTs     CFST    

HTML PDF 收藏

Initial stiffness and moment resistance of reinforced joint with end-plate connection

Sufang WANG, Yiyi CHEN,

《结构与土木工程前沿（英文）》 2009年 第3卷 第4期   页码 345-351 doi: 10.1007/s11709-009-0054-x

摘要： In beam-to-column joint with bolted end-plate connection, the structural details of column flange reinforced by backing plate and column web panel reinforced by supplementary plate are analyzed. The joint is divided into some basic components, and the initial stiffness of each component is obtained. Especially, the initial stiffness of reinforced components is drawn by theoretical model and finite element analysis. The initial stiffness of reinforced joint can be obtained by assembling the initial stiffness of each component. The design moment resistance of column flange reinforced by backing plate is deduced based on yield line method, and the design moment resistances of other components are deduced based on present codes. The design moment resistance of the reinforced joint is then determined by the minimum of the design moment resistances of all components. By comparison with the results of finite element calculation, it is verified that the method to calculate the initial stiffness of reinforced joint is accurate enough to be used to estimate the rigid behavior of the joint and to make parametric study.

关键词： steel structure     end-plate connection     backing plate     supplementary web plate     initial stiffness     moment resistance    

HTML PDF 收藏

大跨径悬索桥钢塔塔底钢混连接处承压板后压浆施工技术

张平,蒋建,董勤军,蔡伟,刘颖

《中国工程科学》 2010年 第12卷 第4期   页码 53-57

摘要：

泰州大桥为三塔两跨悬索桥，中塔纵桥向为人字型钢塔，两条斜腿在塔座顶面用螺杆锚固，通过钢塔D0段承压板与塔座顶面传递压力。塔座顶面混凝土具有双向斜坡度，在塔座顶面预留压浆空隙，待钢塔D0段安装定位后，再对预留空隙采用压浆机压入无收缩高强度水泥浆作为承压板的支承面。文章简要介绍了D0段承压板压浆施工技术及施工工艺。

关键词： 高强度     自流平     无收缩     后压浆     工艺    

HTML PDF 收藏

标题 作者 时间 类型 操作

Parametric study of hexagonal castellated beams in post-tensioned self-centering steel connections

Hassan ABEDI SARVESTANI

期刊论文

Seismic tests of post-tensioned self-centering building frames with column and slab restraints

Chung-Che CHOU, Jun-Hen CHEN

期刊论文

Self-centering steel plate shear walls for improving seismic resilience

Patricia M. CLAYTON,Daniel M. DOWDEN,Chao-Hsien LI,Jeffrey W. BERMAN,Michel BRUNEAU,Laura N. LOWES,Keh-Chuan TSAI

期刊论文

Probabilistic safety assessment of self-centering steel braced frame

Navid RAHGOZAR, Nima RAHGOZAR, Abdolreza S. MOGHADAM

期刊论文

Validation of a steel dual-core self-centering brace (DC-SCB) for seismic resistance: from brace member

Chung-Che CHOU,Ping-Ting CHUNG,Tsung-Han WU,Alexis Rafael Ovalle BEATO

期刊论文

Secondary transfer length and residual prestress of fractured strand in post-tensioned concrete beams

Lizhao DAI; Wengang XU; Lei WANG; Shanchang YI; Wen CHEN

期刊论文

Experimental study of the restoring force mechanism in the self-centering beam (SCB)

Abhilasha MAURYA,Matthew R. EATHERTON

期刊论文

Parametric study on seismic performance of self-centering reinforced concrete column with bottom-placed

期刊论文

Computational studies on the seismic response of the State Route 99 bridge in Seattle with SMA/ECC plastic hinges

Jiping GE, M. Saiid SAIIDI, Sebastian VARELA

期刊论文

Static behavior of planar intersecting CFST connection in diagrid structure

Ling LI, Xianzhong ZHAO, Ke KE

期刊论文

Experimental study on pile-end post-grouting piles for super-large bridge pile foundations

Weiming GONG, Guoliang DAI, Haowen ZHANG

期刊论文

Stress-strain relationship of recycled self-compacting concrete filled steel tubular column subjected

Feng YU, Cheng QIN, Shilong WANG, Junjie JIANG, Yuan FANG

期刊论文

Experimental research on self-stressing and self-compacting concrete filled steel tube columns subjected

Chengkui HUANG, Zuoqing SHANG, Peng ZHANG,

期刊论文

Initial stiffness and moment resistance of reinforced joint with end-plate connection

Sufang WANG, Yiyi CHEN,

期刊论文

大跨径悬索桥钢塔塔底钢混连接处承压板后压浆施工技术

张平,蒋建,董勤军,蔡伟,刘颖

期刊论文